dagamelord (December 31, 1969 at 5:59 pm)

i cant find the option to change the chanel

mainman00004 (December 31, 1969 at 5:59 pm)

I tried what I explained below in the properties area (ip version 4 section) of my local area connection 3

daovertaker (December 31, 1969 at 5:59 pm)

try setting the pc to a static Ip example:IP address: 192.168.1.100subnet:255.255.255.0default gateway : 192.168.1.1

mainman00004 (December 31, 1969 at 5:59 pm)

Hey, great video by the way but i seem to have a problem. I have a dd-wrt linksys wrt54g v6 router. I was able to bridge the connection between the my 1st router and my dd-wrt router using your client bridge method. I was also able to connect to my xbox live via a ethernet cable from my dd-wrt router and my xbox360. But, when i connect my computer directly to dd-wrt router with an ethernet cable, I cant connect to the internet. I think it maybe something in my settings. Any suggestion? Pls help.

daovertaker (December 31, 1969 at 5:59 pm)

I am using dd-wrt v.24 micro on the 2nd router and dd-wrt v.24 mega on the primary

daovertaker (December 31, 1969 at 5:59 pm)

I had this problem also however what worked for me was to start wep on the 1st and 2nd router once the 2nd router recognized wep made made the change to WPA on both been working ever since also don't forget to have shared key checked

daovertaker (December 31, 1969 at 5:59 pm)

2ways physical and wireless connectionphysical: Xbox recognizes router as if the xbox is connected to the internet wiredWireless: Xbox recognizes it's connections as if it were using the wireless adapater.

daovertaker (December 31, 1969 at 5:59 pm)

connect an ethernet cable from one of the ports on the primary router to the second router where it saids internet

turking22 (December 31, 1969 at 5:59 pm)

Exelente Video !! ... Wath´s the version that you are using in this video? i donwnload the ultimate version today but it didn´t have the REPEATER BRIDGE option. Pls HELP! ;)

daveolso (December 31, 1969 at 5:59 pm)

Followed all this.. Only problem I was having is that when enabling security I couldn't use WPA. It works in client bridge but it doesn't work in with repeater. I had to use WEP from the first Access point to the second and then use WPA from there. It then worked just fine. Only thing I can think of is that it wasn't using the same password. But it does work when using WEP so I'll use that for now.