Hydrogen Tap 1 Series 2 (car Installation) #31
 |
||
 |
 |
|
 |
||
This is the Series 2 being installed into the car. The Video shows all the interments that I am using to monitor the system. The cab is set up with a volt and Amp meter along with a timer that gives read out of the amount of time the unit is working. I also am installing a water level meter that has turned out to be more effort than I had planned. I was going to install another meter but decided to install a light instead. This means a relay and other hardware. The Series 2 unit is the 2nd of 3 steps toward a gasoline free car.
Channel: Howto & Style
Uploaded: December 31, 1969 at 5:59 pm
Author: johnaarons
Length: 04:17
Rating: 4.73
Views: 20290
Tags: car engine free hydrogen power tap
Video Comments
|
johnaarons (December 31, 1969 at 5:59 pm)
There are over 100 videos now ... click on "john AArons". John AArons
johnaarons (December 31, 1969 at 5:59 pm)
There are over 100 videos now and the answer is yes. Go to the top and click on "johnaarons" than click on "see all". The video you are after is number 94. I would copy the address for you but the tube won't allow that. The sludge in the water, if you use distilled water and use lye it will be gone. John AArons
GkillerDogg (December 31, 1969 at 5:59 pm)
Dont like that unit john, cause its made from plastic, and connections dont look stable, I like your therory however. redesign your gen.. good luck.
hydrogenassist (December 31, 1969 at 5:59 pm)
Hello, I have been looking at all of your experiments, I have tried stainless steel, I'm not sure whether it was 304 or 316L not much luck getting it to hold up over time. It creates to much sludge, I was curious to know whether you were able to solve the problem when you put your unit in the car.
lookingOK (December 31, 1969 at 5:59 pm)
I can see you are an innovative Engineer..most inventions have been created by accident or by unqualified people. Maybe you could help with what he is trying to do. If you look up Stan Meyer..he used pulsed power which was able to produce hydrogen with mAmps.
johnaarons (December 31, 1969 at 5:59 pm)
I have given you your 15 sec. John AArons
taxi1nl (December 31, 1969 at 5:59 pm)
Hi John,can you explain to me again where the black tube goes?I`m sorry, but i`m from The Netherlands and my english is not so good...why are there 2 tubes for the gas to come out?thnx and keep up your work!
louuis (December 31, 1969 at 5:59 pm)
hello john,i tried with steel pipe and it comes out in salt pitted,disolving copper holds up good seems okay.waiting to here from you lou
louuis (December 31, 1969 at 5:59 pm)
hi john, sorry for trouble,use ss tube,with treated wood ends drill ground wire to plates inside tube + to tube lou
johnaarons (December 31, 1969 at 5:59 pm)
I am having a problem with the fitting on top of the unit. The heat is causing the top of the unit to melt. I will have to make another unit out of steal. John AArons |