Hydrogen Tap (New AAron's Cell N-16) 253
 |
||
 |
 |
|
 |
||
This video show the new Cell that allows you to make any plate into a Neutral Plate along with the ability to change the plates to the charge (+)(-). The cell also can turn off one side.
Channel: Science & Technology
Uploaded: November 27, 2007 at 6:09 am
Author: johnaarons
Length: 09:53
Rating: 4.76
Views: 15410
Tags: car cell energy free hydrogen tap
Video Comments
|
johnaarons (July 28, 2008 at 6:05 pm)
Most cells (including mine) require a switch that will through at least 15 amps to 30 amps.. but you can do that... the problem is that (like I did once) you may forget to turn off the cell when the car is off..John AArons
whloo (July 28, 2008 at 3:19 pm)
can i use switch control to control the electric flow to the hydrogen tap ?(i mean high low)tq
johnaarons (July 17, 2008 at 7:14 pm)
This is an old video... there are over 356 videos out there and my new cell "FOCUS" does use "Neutral" (Blank) plates..John AArons
brown55061 (July 17, 2008 at 6:34 pm)
I saw the website. Is 430 SS better than the T-304, 312 etc? I know nothing about the contents of the metals. I was just thinking more neutral plates will lower the amps and reduce heat and corrosion. Sure its not as powerful but you would replace less plates in theory.
johnaarons (July 17, 2008 at 6:19 pm)
In fact you are wrong... That unit is one of the most solid blocks out there... John AArons
brown55061 (July 17, 2008 at 5:38 pm)
What kind of amp draw is there when a system using that many negative and positive plates create? And how thick are your plates? They dont look like they'd last too long, ast least not a year if you are pushing a lot of power. Just curious! =)
johnaarons (June 21, 2008 at 3:35 am)
The "FOCUS" plates "NOW" use two 1/16" Nylon washer on each Nylon screw... giving you the 1/8th.
sillygrouse (June 20, 2008 at 1:24 am)
what do you space the plates with
rbl777 (June 18, 2008 at 2:23 pm)
thx dudehow much would u say it costs to make a cellthat would produce about 24V ? or multiple cells?thx
johnaarons (June 12, 2008 at 1:34 pm)
This is an old video... the spacers are hand made 1/8 inch plastic.John AArons |